PRODUCT INTRODUCTION
Low Friction Cemented Carbides with Both Impact Resistance and High Toughness
PRV Series
- Corrosion
Resistance - Impact
Resistance - Seizure
Resistance - High Fracture
Toughness
PRV Series is particularly characterized by high toughness by adopting ultra-coarse grained WC. Furthermore, it also excels in seizure resistance by adding low-friction to RX Series while retaining the original characteristics. It is suitable for applications such as irregular-shaped die molds where stress is concentrated locally.
Properties
Grades | Grades Classification Symbol | Specific Gravity |
Hardness (HRA) |
Transverse Rupture Strength (GPa) |
Fracture Toughness (MPa・m½) |
---|---|---|---|---|---|
PRV6N | VU-40 | 14.85 | 90.0 | 2.4 | 18 |
PRV12N | VU-60 | 14.25 | 86.5 | 2.5 | 25 |
PRV18N | VU-70 | 13.70 | 84.5 | 2.4 | 28 |
PRV24N | VU-70 | 13.10 | 82.5 | 2.3 | 32 |
※All data shown are typical values, not guaranteed values.
※We will not compensate any loss and damage caused by using all data.
※We reserve the right to modify the data due to technical progress.
Characteristics
Coefficient of Friction Comparison Result between PRV Series and RX71
-
- Coefficient of Friction for Copper Alloy
- The coefficient of friction of PRV6N is lower than that of RX71.
-
- Coefficient of Friction for Aluminum Alloy
- Although there are some areas where the values are similar, overall PRV6N has lower friction comparing to RX71.
-
- Coefficient of Friction for SUJ2
- The coefficient of friction of PRV6N is lower than that of RX71.
-
- PRV18N Microstructure
Typical Applications
- Dies
- Punches
- Die